The CW signal of the WCARC beacon can be heard on 903.367MHz. If you are close, you will hear the steady tone of the oscillator under the main signal, because the PA is keyed, not the oscillator.

Near view of the Beacon

beacon close up
Picture by Phil VE3CIQ

Beacon in the Bay - view 1

beacon installed in the bay 1
Picture by Phil VE3CIQ

Beacon in the Bay - view 2

beacon installed in the bay 2
Picture by Phil VE3CIQ

Beacon Antenna

beacon antenna
Picture by Phil VE3CIQ

View from the roof #1

beacon view from the roof 1
Picture by Phil VE3CIQ

View from the roof #2

beacon view from the roof 2
Picture by Phil VE3CIQ

Signal as seen by Tom VA3NFA

hamscope trace of beacon signal
Picture by Tom VA3NFA